Skip to main content
Technician servicing the controls of a wall-mounted boiler
Our Services

Boiler in Asbury, NJ

Boiler repair, installation, replacement and yearly service for homes in Asbury, NJ and the surrounding area, from a family-owned team.

Since 1984 Family owned & operated
300 Homes on maintenance plans
11 Logo-wrapped service trucks
2-Year Parts & labor warranty on new installs
Trane Comfort Home Specialist Mitsubishi Diamond Dealer Fujitsu Diamond Techs EPA-certified technicians NJ Master HVACR licensed Home improvement licensed in NJ & PA Fully insured Free estimates on new installs

Advanced Heating & Air Conditioning repairs, installs, replaces and services boilers for homes in Asbury, NJ and the surrounding area. We work on gas and oil boilers, both hot water and steam, and we've been heating local homes since 1984.

What to Expect From Our Boiler Service

  • Professional, courteous people. A real person answers the phone, and a family-owned team that has served homeowners since 1984 comes to your door.
  • Capable, EPA-certified technicians. They find the real cause and fix the problem itself, not just the symptom.
  • Transparent, hassle-free pricing. You get an upfront price before any work begins, so there are no surprises on the bill.
  • Respect for your home. Technicians work carefully, clean up when they leave and explain what they did.

When You Need Boiler Repair

The common signs:

  • Radiators or baseboards that stay cold while the thermostat calls for heat
  • Banging, rumbling or whistling from the boiler or the pipes
  • Water on the floor around the boiler
  • A pressure gauge reading lower or higher than it used to
  • A boiler that locks out and needs the reset button pressed to run again

Our technicians find the cause and quote the repair before any work starts. Every repair visit carries our Tier 1 Site Visit and Diagnosis Fee, and the full fee list is on our boiler repair page.

What Goes Into a New Boiler Installation

Estimates on new systems are free and come from one of our owners, Nick Smith or Louis Roerig, usually within a couple of days. Installs are booked within weeks. We pull all permits and remove and haul away the old equipment. Every new system install carries our warranty:

2-year parts and labor warranty on new system installs. Does not cover pre-existing ductwork or damage from other contractors.

See our boiler installation page.

When It's Time to Replace a Boiler

When repairs keep stacking up, a free estimate lets you compare the two side by side. A new installation comes with a brand-new warranty. Some homeowners use replacement to switch from oil to gas, and we even remove your above-ground oil tanks. See our oil to gas conversion page, or our boiler replacement page.

Why a Boiler Needs Yearly Service

A yearly visit cleans, adjusts and tests your boiler before the cold weather does. Maintenance plans for gas, oil and steam boilers are custom to each home. See our boiler service page.

Service Contract Program Benefits

Customers on our Service Contract Program get regular planned maintenance, 10% off all parts and labor, including emergency service, and a place ahead of non-agreement customers for emergency calls. Agreements renew yearly. Compare the options on our HVAC maintenance plans page.

The Technicians Who Work on Your Boiler

We're a family-owned company. We started in 1984 as Alpha Oil Company and have been Advanced Heating & Air Conditioning since 2000. Our technicians are EPA-certified, and we're licensed in New Jersey and Pennsylvania and fully insured. We work out of Asbury and cover the rest of our service area in New Jersey and the Easton area of Pennsylvania.

Common Boiler Types and Their Operating Differences

Hydronic heating systems generate warmth by heating water inside a closed vessel. A hot water boiler uses a circulator pump to push heated liquid through pipes connected to radiators or baseboard convectors. Steam boilers operate differently, relying on pressure to send vapor through the distribution lines and gravity to return the condensed water to the boiler.

  • Cast-iron boilers. These traditional units feature heavy metal heat exchangers built for longevity and steady heat retention.
  • Condensing boilers. These cool their exhaust enough to condense its water vapor, recovering heat that a conventional boiler loses up the chimney.
  • Combi boilers. A single wall-hung unit warms the radiators and also heats tap water as it flows, so no separate water heater tank is needed.

Key Factors in Selecting a Boiler System

Finding the right system requires matching the equipment to the existing infrastructure and comfort preferences. The available fuel source dictates the specific burner and venting requirements for the property. Sizing the unit involves calculating heat loss while evaluating the capacity of the current baseboards or radiators. Hot water systems can also be split into zones, each with its own thermostat and a zone valve or circulator, so one floor can stay cooler than another.

How Boiler Heating Influences Indoor Comfort

Hydronic heating changes the way a home feels compared to forced-air systems. Because boilers circulate heated water or steam through closed pipes, they warm a room through radiant heat and natural convection. This process warms objects and people directly rather than blowing heated air into the space.

The absence of forced air means the system does not actively circulate airborne dust through ductwork. It also operates quietly, without the sound of a blower motor or rushing air. The steady release of heat from radiators or baseboards creates a consistent temperature profile from floor to ceiling.

  • Radiant heat delivery. Warms the room without creating drafts or moving air.
  • Floor-level warmth. Baseboards and radiators placed under windows offset the cool air that slides down the glass.
  • Temperature consistency. Baseboards and radiators provide steady warmth across the space.

Understanding Boiler Efficiency in the Home

A boiler carries an Annual Fuel Utilization Efficiency rating, which indicates how effectively the equipment converts fuel into usable heat over an entire season. A higher rating means less fuel escapes as exhaust and more is captured to warm the house. However, the rating on the equipment label is only a single factor.

Real-world efficiency depends heavily on how the system integrates with the home. Proper sizing is critical, as an oversized boiler will cycle on and off too frequently, wasting fuel and increasing wear on components. The condition of the distribution piping and the effectiveness of the home insulation also dictate how much heat actually reaches the living spaces.

  • Equipment sizing. A correctly sized unit runs in longer cycles instead of short bursts.
  • Pipe insulation. Uninsulated pipes in cold basements lose heat before it reaches the radiators.
  • System controls. Modern thermostats and outdoor reset controls adjust water temperature based on weather conditions.

Safety Fundamentals for Fuel Burning Boilers

Boilers that burn natural gas, propane or heating oil require specific safety measures to protect the household. The combustion process creates exhaust gases, including carbon monoxide, which must be safely vented outside. Because carbon monoxide is an odorless and colorless gas, specialized alarms are necessary to alert homeowners if venting fails.

Modern boilers incorporate built-in safety mechanisms to monitor the flame and the exhaust draft. If these sensors detect a problem with combustion or venting, they will shut the system down to prevent hazardous gases from entering the living space. Proper ventilation around the boiler is also necessary to provide enough fresh air for clean combustion.

  • Carbon monoxide alarms. Essential devices that detect invisible exhaust gases indoors.
  • Venting pathways. Chimneys and exhaust pipes must remain clear of debris and blockages.
  • Combustion air. The equipment requires adequate fresh air to burn fuel cleanly.

Integrating a Boiler with the Home Infrastructure

A boiler operates as the core of a larger hydronic network. The heated water travels through a closed loop of piping, relying on circulator pumps to reach every baseboard, radiator or radiant floor loop. The layout of this piping determines how evenly the heat is distributed throughout the house.

This setup allows for precise control over different areas of the home. By installing zone valves or dedicated circulator pumps, the piping can be divided into separate heating zones. Each zone connects to its own thermostat, allowing a homeowner to heat occupied rooms while keeping unused areas cooler.

  • Circulator pumps. Devices that push heated water through the distribution network.
  • Zone valves. Mechanisms that open or close to direct hot water to specific areas.
  • Independent thermostats. Controls that manage the temperature for individual heating zones.

Talk to Us About Your Boiler

Call (908) 574-2184 for boiler repair, a free replacement estimate or a yearly service visit.

When to Call

Signs It’s Time to Call a Technician

  • No heat from the radiators or baseboard
  • Water leaking around the boiler
  • Low or dropping system pressure
  • Banging or knocking noises
  • Some radiators stay cold while others heat
  • The boiler won't stay lit

What You Get

What Our Boiler Service Covers

  • Boiler repair with an upfront quote before any work
  • Yearly boiler service
  • Boiler replacement, right-sized to your home
  • 2-year parts and labor warranty on new system installs

How It Works

How a Service Visit Works

  1. 1

    Call or Request Service

    A real person takes your call and gets the details. We set up a visit that works for you, and our 24/7 emergency line is there when the heat or cooling goes out.

  2. 2

    Diagnose & Quote

    Our technician arrives with a fully stocked truck, finds the real cause, and gives you an upfront price before any repair begins. Estimates on new installations are free.

  3. 3

    The Work, Done Right

    EPA-certified technicians do the repair or installation — careful with your home, clean when they leave, and clear about what they did.

  4. 4

    Backed & on Record

    New system installs carry a 2-year parts and labor warranty, and we keep written service records.

Brands We Trust

Featured Manufacturers

Advanced Heating & Air is a Trane Comfort Home Specialist, a Mitsubishi Diamond Dealer, and a team of Fujitsu Diamond Techs. We match the right equipment to your home or building.

Trane — authorized dealer
Goodman — authorized dealer
Mitsubishi Electric — authorized dealer
Fujitsu — authorized dealer
Bosch — authorized dealer
Navien — authorized dealer
Energy Kinetics — authorized dealer
Durastar — authorized dealer

Reviews

What Your Neighbors Say

4.4from 115 Google reviews

Read our Google reviews(opens in a new tab)
Called 6 companies to get estimates on an install of a complete new central air system & had only 2 show up and give estimates. Nick Smith showed up to walk the job & give his suggestions on the layout of the system & was very professional & knowledgeable. He was willing to work with me as the homeowner as well. He had a crew of guys on the job within 2 weeks & installed the complete system in 1 day. Highly Recommend Advanced Heating & Air Conditioning if you are in the market keep them in mind you won't be disappointed.
RCRobert C.Central air installation
Advanced is the BEST HVAC Company around, Bar None! Owner Nick comes out and evaluates the job promptly, explains in detail the work needed and time it will take to complete. Then within 2 days you'll have the estimate with several options. I currently needed a new, more efficient Central Air unit relocated. Not only is their pricing very competitive, the professional crew is top notch! Tom, Connor, and Paul performed the task without issues, cleaned up perfectly, and in less than 6 hours the system was up and running. They also replaced my furnace 6 years ago without a hitch! Kudo's to Nick and his Awesome Staff!
ENEd N.Central air relocation
These folks have all the earmarks of a big, uncaring HVAC company, but don't be fooled. I used them last year for a gas heat cutover and the work they did was immaculate, and any problems I've had since have been handled quickly and effectively by absolute pros. I'll definitely be coming back whenever I need HVAC work done.
BKBen K.Gas heat cutover
Their service is above and beyond! They modified my heating system wonderfully to supply me with a comfortable temperature for whichever portion of my house I am using. It's a slice of warmth for which I am grateful!
KSKathie S.Heating system
We used this company to convert our heating system from oil and some of our propane appliances to natural gas. The crew is so polite, friendly, and professional. They made us feel so comfortable from the moment they stepped into our house and kept everything clean as they worked. They explained everything in detail every step of the way. They even removed the oil tank which made the transition less stressful! I would use them again and HIGHLY recommend! Great crew! You guys are amazing! Thanks again!
LNLucia N.Oil to gas conversion
Professional, on time, reliable, honest, courteous, estimate was spot on. Nick, came and checked out the old furnace, gave me an estimate with options. Diana, always followed up and kept in contact with me. Tom and Ashton installed my furnace, were neat, professional, knowledgeable, and courteous.
AFAngela F.Furnace replacement

Good to Know

Boiler FAQs

How much does a new boiler cost?

It varies by customer and household — why don't we set you up with one of our owners for a free estimate?

What if my boiler quits at night?

Call now — a real person answers 24/7 and a tech calls back within 30 minutes.

What is the difference between a one-pipe and a two-pipe steam system?

A one-pipe steam system uses a single pipe to each radiator, so steam rises and condensed water drains back down the same line. A two-pipe system gives each radiator separate supply and return pipes, and a steam trap at each radiator usually keeps steam out of the return.

How does an expansion tank work in a hydronic system?

The expansion tank takes up the extra volume water gains as it heats inside the closed pipes. This component protects valves and fittings from stress while keeping the system pressure stable during an active heating cycle.

Why does hot water baseboard have metal fins?

Hot water baseboard runs a copper pipe through closely spaced aluminum fins inside a metal cover. The fins add surface area, so room air passing over them by natural convection picks up more heat from the water inside the pipe.

How does radiant floor heating work with a boiler?

Radiant floor heating uses a network of flexible tubing installed beneath the flooring. The boiler pumps warm water through this tubing, turning the entire floor into a large radiator that gently warms the room from the ground up.

Why do some hydronic systems use antifreeze?

Some hot water systems are filled with a glycol mix instead of plain water, usually where piping runs through spaces that could freeze. The mix carries heat a little less effectively than water, so the system is designed with that in mind.

Can radiator covers affect how much heat a room gets?

Covers and enclosures can reduce the heat that reaches a room because they restrict the air flowing up through the radiator. Designs with open fronts and tops let more air move through, and a reflective panel behind the radiator helps direct heat into the room.

Why do some boilers vent through the wall instead of a chimney?

High-efficiency condensing boilers extract so much heat from the exhaust that the remaining gases are cool enough to vent through plastic pipes. This allows the exhaust to be routed directly through an exterior wall rather than requiring a traditional masonry chimney.

How long does a boiler last?

Most boilers last about 10–15 years. Annual service helps a boiler reach that; once it is near the end of it or failing repeatedly, a new install with our 2-year parts and labor warranty is usually the better value.

Est. 1984

Get Your Comfort Back

One call gets a licensed technician headed to your door. We repair, replace, and maintain heating and cooling systems across Northwest New Jersey — day or night.

24/7 Emergency Service Family-Owned Since 1984