Did you know that our Member1 Service Club members receive regularly scheduled maintenance and 10% off of all Emergency Repairs?
Did you know that up to 80% of all AC compressor failures could be eliminated if the problems that lead to the failure were corrected in a timely manner?
Air Conditioner Maintenance Checklist
✔ Straightened and cleaned
Dirty condenser coils can increase your electric bill by raising refrigerant pressure unnecessarily.
Even a small amount of dirt can decrease efficiency and increase operating costs. Dirty Evaporator coils are also a major cause of compressor failure
✔ Inspected and cleaned
Dirty blower wheels reduce air flow, causing longer operating time and increased cost. This problem can lead to lost comfort.
A low or high refrigerant charge can easily co unnoticed and increase operating costs. An Improper charge can cause the compressor to shut down entirely.
✔ Replaced at customer's option
A restricted air filter can cause your air conditioning unit to waste energy and shorten the compressor’s life.
BELTS AND PULLEYS
✔ Inspected and adjusted
Loose belts and worn pulleys decrease air flow, increase operating costs and shorten the compressor’s life. Belts crack and break with age.
MOTORS & BEARINGS
Improperly lubricated rotating equipment will cause moving parts to fail.
✔ Checked and calibrated
Improperly calibrated thermostats allow the unit to run longer than necessary. Every degree your air conditioning operates below 78 degrees can add 5 – 8% to the cost of cooling.
CONTROLS & SAFETIES
✔ Tested and inspected
Controls and safeties that do not function properly can increase operation cost and cause other components to fail.
✔ Cleaned and inspected
Dirty motors decrease efficiency of the unit and decrease will eventually shorten the lifespan of the equipment.
✔ Inspected and tested
Bad capacitors can lead to compressor and motor failure.
Algae can plug a condensate drain which can cause expensive water damage.
Crankcase heaters that do not work can lead to compressor failure.
RELAYS & CONTACTORS
Worn contacts and loose wire connections can lead to a motor or compressor failure.
A worn or over-heated disconnect blows fuses and is dangerous.
✔ Inspected and connections tightened
Loose connections can lead to a motor or compressor failure.
TEMPERATURES & PRESSURES
✔ Recorded and documented
An accurate record of your equipment’s vital data can indicate potential problems, which can be eliminated. A record will be kept with the unit which may reduce be used to reduce emergency service time.
✔ Inspected for leak and proper insulation
Duct leaks may exist from the time it was installed and insulation can fall off. Unrepaired duct work problems can increase operating costs by 30% or more. Accessible duct work will be inspected at least once during the first year of the agreement.
Contact Advanced Heating & Air Conditioning
We offer 24/7 Emergency Service to all of our customers.
Enjoy Continuous Comfort with Quality HVAC.
We use state-of-the-art diagnostic equipment to find the source of your heating and air conditioning problems and fix them fast.